basket  0
HOME >> Servos, Batteries and Accessories >> Servo horns and throttle towers

Servo arm Futaba alloy, black, - 344050


15.12 quantity:  

Servo arm in black alloy,

The Lightscale XL servo arm can be used with Futaba and compatible servos that use the same width as the updated version of the REFLEX servo saver. Its solid alloy construction with 3mm holes to support the connection rods to the servo saver and offers an extra position of 44mm width which matches those of the REFLEX servo. This extra width results in more room for the steering connecting rods in case the saver twists while you steer to one side and so offer an even better protection of your servos` gear.
Due to the exact match of both the savers and the arms width, the connection rods will be parallel 100% and no tension is applied to the gear while the servo is moving.
Not only for steering but also for use with throttle and brake the Lightscale XL arm is a good choice. Normally you will not find enough servo travel to open fully or activate the right power to your brakes. The XL arm will stop this problem.

15.12
Quantity






recommend a friendRecommend to a friend