http://www.rapid-racing.co.uk Digital camber adjustment gauge magnetic with 2 metal adjustment discs||||161||||2010/9/6 This set facilitates the easy and very accurate adjustment of camber at the front and rear axle. The wheels are fixed with the metal adjustment discs instead of wheel nuts. The digital camber adjustment gauge clings by means of magnets at the discs. You have your hands free in order to adjust... http://www.rapid-racing.co.uk/blog.asp?date=9/6/2010&EventID=161 CNC milled tuning isolator||||160||||2010/7/9 CNC milled isolator made of high quality plastic. Very form and temperature stable. The changed height and the optimised outlet contribute to improvement of performance and less fuel consumption. ... http://www.rapid-racing.co.uk/blog.asp?date=7/9/2010&EventID=160 Conversion kit SX-3 Serie 5 - 010 (1515912)||||159||||2010/7/6 The success story continues… After a lot of engineering work and tests we are now in the position to present the SX-3 – 010 as a completely reworked chassis concept. Of course we will also offer a corresponding conversion kit for all existing chassis. Since the last upd... http://www.rapid-racing.co.uk/blog.asp?date=7/6/2010&EventID=159 Carbon fiber side guards thick (1511060-1)||||158||||2010/6/25 Lateral protection for the chassis and reinforcement for the body. This version is 4 mm thick and 24 mm wide and therefore very robust. Special edition, just as long as stock lasts! ... http://www.rapid-racing.co.uk/blog.asp?date=6/25/2010&EventID=158 Conversion kit tuning opposed piston 2010 - 1502824-1||||156||||2010/6/2 The new opposed piston fits the standard on-road shock #1502823. The opposed piston is higher and is equipped with two o-rings, what prevents tilting of the piston. Also the spring has been adapted in order to guarantee optimal function of the volume compensator. Filling of the shock is also... http://www.rapid-racing.co.uk/blog.asp?date=6/2/2010&EventID=156 CFK wing race-style - 1511144||||155||||2010/6/2 This wing is a laminate profile with maximum drive side values and less resistance. The scaled wing profile has proved its liability in motor sports as well as with CFD calculations. Due to the manufacturing process small changes have been made with regard to the “Original”. The wing has... http://www.rapid-racing.co.uk/blog.asp?date=6/2/2010&EventID=155 PMT Maxiblockpass soft glued on disk-rim - 1549450-1||||154||||2010/6/2 The PMT Off-Road tyres are also delivered glued on Disk-rim. The rim is a so called “Offset-rim” and fits the H.A.R.M. BX-3, Hörmann TK09/TK10, Elcon and others without making the vehicle wider. These tyres have been distributed by DLD in the past. Now they are distributed directly t... http://www.rapid-racing.co.uk/blog.asp?date=6/2/2010&EventID=154