| Tuning stabilizer support rear 09, kit (1502706) (17 June 2009) |
|
The new inner stabilizer support facilitates exact adjustment considerably. At the moment adjustment is made just by means of the outer stabilizer supports which are easily accessible. The ball beari...
More info >>> |
|
| Tuning stabilizer support front 09, kit (1502705) (17 June 2009) |
|
The new inner stabilizer support facilitates exact adjustment considerably. At the moment adjustment is made just by means of the outer stabilizer supports which are easily accessible. The ball beari...
More info >>> |
|
| H.A.R.M. SX-3 Chassis kit `Euro-Edition` (1305009-k) (20 May 2009) |
|
The High-end Chassis SX-3 "Euro-Edition"
The special "Euro-Edition“ is available as chassis-kit with exactly the same equipment as it will be driven of the H.A.R.M. team drivers at the Europe...
More info >>> |
|
| Conversion Kit Front Axle 2009 (1515907) (20 May 2009) |
|
The front axle reinforcement plate has been lowered in order to facilitate equal “movement” of the chassis. Therefore the effect already achieved by using the thinner chassis reinforcement # 1511123-1...
More info >>> |
|
| Mag.-Differential 09 (1511513) (20 April 2009) |
|
The edition 09 of the Mag-Differential has been once again enhanced in order to provide the possibility of manual blocking. The manual blocking is effected by means of conical washers and pressure spr...
More info >>> |
|
| Alloy support for fuel tank fixation strap, 1 pair (1502123) (30 April 2009) |
|
The new alloy support facilitates removal of the strap for fixation of the fuel tank. Therefore the fuel tank can be mounted and dismounted easily.
Fits all SX-3 chassis from ...
More info >>> |
|
| Alloy axle hub front, off-set 1,5 mm, kit (1511206-11) (20 April 2009) |
|
In comparison to the axle hubs 3 mm off-set this edition provides considerable advantages with regard to roll speed in curves as well as traction.
More info >>> |
|
| H.A.R.M. XS one Powerservo (3001000) (14 March 2009) |
|
The right choise if you need torque, holding power and durability!
Due to this fact F. Pisoni from Italy looked into the available technology of servos big scale and realized a radical con...
More info >>> |
|
| 2009 Mag Diff conversion Kit (1511513-1) (20 April 2009) |
|
The conversion kit enables to convert a standard Mag Diff into the 2009 edition
More info >>> |
|
| Professional set-up tool for front and rear axle, kit (1511564) (14 March 2009) |
|
For those who want to be sure!
This high-precision set-up tool facilitates very accurate adjustment of the chassis.
Necessary for the use of this set-up tool is a 100 % straig...
More info >>> |
|
| Hydraulic distributor front (1511196-2) (3 April 2009) |
|
The distributor is mounted at the rear of the front damper brake. This place facilitates the mounting of the tubes. The connection parts are not included.
More info >>> |
|
| Rear support double (1504386) (3 April 2009) |
|
Stable brace for the body support. Facilitates also the use of export setup tool # 1511564.
More info >>> |
|
| SX-3 available with extended equipment! (3 April 2009) |
|
The SX-3 Champion-Edition Chassis comes stock with the following additional parts:
- Two-part differential mounts, kit
- Hydraulic brakes front and rear with epoxy discs
- Spe...
More info >>> |
|
| Two-part differential mounts (1502368) (14 March 2009) |
|
Change your differential really quickly!
The new two-part differential mounts, which fit the H.A.R.M. SX-3 Chassis with rear axle serie 4 (2008), facilitate quick and easy change of the diffe...
More info >>> |
|
